Showing posts with label Africa. Show all posts
Showing posts with label Africa. Show all posts

Tuesday, June 1, 2010

A simple harpoon from the Sahel area


Here's one of the handful of primitive weapons I've purchased somewhere other than eBay, and one of my two harpoons. I will describe the other tomorrow. I bought this from a guy selling African pieces at a flea market in Albuquerque, New Mexico. This particular harpoon, said to be from Niger and certainly from the Sahel region, is probably not the greatest quality, but it's definitely made for use and shows a great deal of ingenuity and resourcefulness. I have not been able to find any similar pieces in the American Museum of Natural History or Pitt Rivers Museum archives. Compare it to the nice, darkly patinated piece below:



The harpoon is thick and sturdy-looking. I'd use it. I wonder what it was intended for...there are some pretty big fish in African rivers, as well as hippos, crocs, manatees - but I'd conservatively assume it was intended for large fish.



Overall, the point is crude but functional. The piece is reddish-colored with light rust and caked-on dirt. The large barbs are cut with a chisel (they're cut out, not lifted off) and bent outward slightly. The point is weakened by the large barbs, which leave a narrow waist that wold be prone to bending (a lot of harpoons, especially whaling harpoons, were designed to bend into pretzels, like the Roman pilum). The socket is roughly-made, with a large hole for bolting the point to a shaft or for attaching a tether. There's probably some use-wear and resharpening.


Length (overall): About 10".
Length (blades/points): About 7 1/2".
Length (other dimensions): Socket is about 2 1/2".
Width at widest point (blade/point): About 2 1/2" if bent tips were repaired.
Width (other dimensions): Socket is about 5/8" wide.

Materials: Probably scrap iron. My impression is that the piece was made from a flat piece of steel cut into shape, with the base shaped into a socket and the tip trimmed into shape.

Sunday, May 30, 2010

A spear butt from Central Africa or Madagascar



Here we have one of the last of my larger spear blades and spear components. I purchased this item via eBay (no surprises there) from a seller who believed it to be a knife or weapon of some sort. Although it superficially resembles some of the edged weapons from central Africa, the presence of a socket indicates this is a spear component of some sort. It is most likely a spear butt (a generally socketed spike or iron object serving as a counterweight to a heavy point). Where it's from, I don't know. My guess would be central Africa or Madagascar. The socket is narrow and it would only be suitable for a light spear.

The object is light, thin and somewhat flexible. It is decorated with faint lines along the middle of the blade. The blade (not really a blade, but corresponding to a blade) is not completely flat, but only faintly lens-shaped in cross section. Spear butts aren't expected to do a great deal, so I guess quality isn't paramount. The edges of the blade are roughly parallel for most of their length; in the last inch or so the edges flare out, giving the butt a spade or spatulate appearance. The socket is crude but functional, with a small hole (punched, not drilled) for a pin or rivet.



Overall, the point is crude yet functional. The blade is rusted and pitted, but the rust is not the flaky, scaly rust found on pieces made from modern steel. The point shows a great deal of use and "experience". The flared-out tips of the blade are bent (they could be straightened out, but carefully to prevent breaking them off). This is a nice, old used item that would make a nice display, but it certainly ain't the greatest piece I have.



Length (overall): About 10".
Length (blades/points): About 7 1/2".
Length (other dimensions): Socket is about 2 1/2".
Width at widest point (blade/point): About 2 1/2" if bent tips were repaired.
Width (other dimensions): Socket is about 5/8" wide.

Materials: Probably scrap iron.

If it is in fact Malagasy, it's a rare and desirable piece. Similar spear butts can be seenhere, here, and here (each from the American Museum of Natural History archives). These butts are much finer, but similar to the present item. It it's from the Congo, the value would be considerably less.

Thursday, May 27, 2010

An ornate processional spear from West Africa



This is an interesting item. It's a very basic socketed spear blade, at first appearance more closely resembling a cake server than a weapon. There's no edge per se (it's either deliberately blunted or unfinished), the barbing on the shank is shallow or possibly unfinished, and the socket is rough and fairly crude. The appearance of the piece is enhanced by extensive engraving on both faces of the blade. I believe this is a legitimate ceremonial or processional item, used as a mark of authority or for ritual purposes. It's from West Africa; I imagine it's from Mali or Burkina Faso. If it's from Mali, it might be Dogon. That's just a guess. The engraving vaguely resembles the decorative markings on a couple of West African arrow points in my collection. Unfortunately, I doubt the markings will be visible in the photos.



The spear head is heavy, with a rough, unfinished appearance. It's made from a single piece of steel drawn into a wide willow-leaf shape, with a short shank and a short, crude socket. A series of shallow barbs is present on alternating edges of the square-sectioned shank. Barbs were struck into the material with a chisel. The barbs are not deep and appear to have been filed down somewhat. There's no median ridge (the blade is essentially flat), and point is either blunted, unfinished or kept blunt intentionally.



Overall, the point is crude and heavy. Several forging flaws. Some patina and minimal rust is evident. The tip is bent, but otherwise the point appears unused.



Length (overall): About 13 1/2" overall.
Length (blades/points): About 8".
Length (other dimensions): Shank is about 3". Socket is about 2 1/4".
Width at widest point (blade/point): About 2".
Width (other dimensions): Socket is 1" wide.

Materials: Probably scrap iron.

I have a few other Western Sahel pieces (mostly arrow points). Will be describing them at some point. This piece deserves more attention, so I'll probably revisit it before too long.

Monday, May 24, 2010

eBay updates

Didn't do as well as I'd hoped to...

I ended up winning three knives: A WWI era Gurkha kukri knife from Nepal, a contemporary Tuareg dagger, and an interesting handmade WWII theater knife. Prices ended up being on the lower side, which is a good thing. I may end up selling the WWII knife and possibly the kukri - I'll have to see how it compares to my other kukri.

I was outbid on these items (I am proving a link to the completed auctions; I'm not sure how long they will be available):

  1. A unique spearhead from Tanzania with an interesting socket (appears to be made from a coil of steel). Sold for $34. I lowered my bid to $25 because I wasn't terribly impressed with it.
  2. Another Central African harpoon, with a more elongated shape. Work was a little rough. Sold for $47. I was the second highest bidder on this one.
  3. A sturdy Ethiopian spear head from the Danakil Depression. Similar to this one, but more robust and less ornate. Sold for about $150, which I imagine is probably about what it's worth.
  4. A Central African Tetela spear blade. An old, used piece, but still very nice and with a striking configuration. Sold for $55.
  5. Another Yakoma spear from Central Africa. Sold for about $200.
  6. Another Mossi spear from Burkina Faso. Blade's been bent and repaired. Sold for a very high $80.
  7. A Filipino dagger from the early 20th century. Nice configuration, with a restored pommel. Sold for a reasonable $45.
  8. A Finnish puukko knife with a damaged sheath. Knife itself is in great shape. Sold for $40.
  9. A Gurkha kukri knife similar to the one I purchased. Sold for $55.
  10. Another kukri, plainer but better constructed than the first. Sold for $65.
  11. A third kukri, a British Mark 1 used in WWI. Sold for a very high $330. One of the most collectible kukris.
  12. Lastly, someone beat me to this Central African (Mongo?) arrow.

Monday, May 17, 2010

Auctions


Here are a few eBay auctions I watched (and unsuccessfully bid on) this weekend. I was outbid on each of them. I did pick up an old, used Papuan cooking utensil made with a coconut shell. I will describe that within the next few weeks.

A Kikuyu spear collected by Quaker missionaries in the 1920s. In perfect condition with a light-colored wood shaft. Sold for about $120.

A massive spear from the Sudan. In very good condition, including brass wire wrap near butt. Shaft is a little warped near butt. Sold for about $150. Shipping would have been prohibitively expensive.

A nice Ngbandi spear from the northern Congo. In excellent condition, with a nice blade and plenty of wire wrapping. I purchased a similar item from the same seller. The one I purchased (and thus, was able to afford) is missing a section of the butt. This complete spear sold for $78, which is not much more than I paid for mine.

A large Zulu assegai or iklwa from South Africa. Point is bound with leather. Appears complete. Sold for $175.

A Yakoma spear from the Congo. An interesting, very light-weight status symbol-type spear. Sold for $121.

A Ngbandi spear head. A strange, thin point with strong barbs; probably part of a status symbol-type spear like #5. It would have made a deadly thrown spear, however. Sold for about $50.

A Somali spear head. Small and light, with a decorative element at base of blade. Similar to the point i described here. Sold for $39.

A spear head from the Congo. Rather crudely made, with a very large barb. A functional hunting weapon. Sold for $40.

An interesting spear head from Uganda. Solidly built and finely made, with two fullers like the Ethiopian points I described here and here. Sold for $40.

A Mossi spear head from Burkina Faso, West Africa. Nicely made for a West African piece, with a long shank and a narrow, willow-leaf shaped blade. Sold for $43.

An arrow point from the Congo. Appears quite old, and is nicely decorated with filed and chiseled elements. 5" overall. Crisp, symmetrical form. Recalls some of the points from the northern Philippines. Has an excellent patina. Sold for a pretty ridiculous $100, at least 2 or 3 times what it's actually worth.

A harpoon point from the Congo. A very graceful, delicate form with very strong barbs. Of a different form than the Congolese harpoon I have in my collection. Retains some of the vegetable fiber cord. Sold for $82.

A very nice Malagasy spear head and butt. Shape of point recalls shape of Sudanese spear (#2). A solid, functional piece with decorative brass inserts.

Kind of a discouraging lot of auctions, but maybe I'll have better luck next time. I would rather be surprised with a good deal on a good piece than have to pay what an item is actually worth (or more than it's worth.)

Saturday, May 15, 2010

A bident spearhead from Ethiopia, Africa


Here is another spearhead from Ethiopia. This piece has an unusual bident configuration, with paired willow-leaf shaped points diverging from a shared base. Otherwise, it shares many characteristics with the more conventional spear I described in my last post. Both spears are decorated with a checkerboard design of alternating sections of bare metal and oxide. The top and bottom of the socket is decorated with a band of bare metal, as is what I guess would be the ricasso? This point has the same long socket and willow-leaf shaped blade (blades, in this case). The twin blades have strong midribs with concave areas left coated with dark-colored oxide.

This spear has no functional value (I'm sure you could find a utilitarian use for a forked spear, but this particular piece is too light and not well-designed for hunting or martial use.) This spear, too, may be more of a cultural item. There's always a temptation to label an unusual item a "ceremonial" piece (read: "I don't know what this is"). This one might actually have some symbolic value: I doubt I still have the PDF, but I once read a paper by a Swedish author describing various bident spears from Africa, all of which had symbolic value.

Like the other Ethiopian point, this is not particularly well-made, but appears to be at first glance. Overall, the shape is trim and elegant. Although the points are needle-sharp, the edges are blunted, which generally indicates a tourist-art origin. A small bit of sprue is left in the area between the prongs. Would have been used with a6-7' hardwood or possibly bamboo shaft. I hope to pair this with a cane shaft in the near future. There's a small, 1/8" hole (neatly drilled) near the base of the ferrule for a pin. Another interesting feature shared by both spears is a neat "hem" of sorts at the base of the ferrule. Instead of ending in a ragged or chisel-cut edge, the material is turned on itself for about 1/4". Makes for a neat, tidy appearance.

Length (overall): About 15".
Length (blades/points): About 7 1/4".
Length (other dimensions): Socket is about 5 1/4".
Width at widest point (blade/point): About 2" across the prongs at the widest point.
Width (other dimensions): Base of points (ricasso?) about 1".

Materials: A lightweight piece of steel. Object has a dirty, dusty appearance (would benefit from a light cleaning). The steel is not high-quality and was probably recycled from scrap materials. The ferrule or socket is long, with an opening slightly less than 1".

I remember seeing a similar spear on display at the Houston Museum of Natural History's Lucy exhibit several years ago. A conventional and bident spear were on display, which leads me to believe they were acquired together. The patchwork design seems diagnostic for Ethiopian spearheads, although it's probably found on Somali points as well. I've passed up opportunities to obtain Ethiopian arrows, quivers, etc (were not particularly high quality). This is the last of the Ethiopian items I'll be describing.

Thursday, May 13, 2010

A spearhead from Ethiopia, Africa



Up next is a nice, slim spearhead from Ethiopia. It has a narrow, willow-leaf shape and a long socket or ferrule decorated with a patchwork design. The blade has a strong midrib, with concave areas left coated with dark-colored oxide. I don't think it's necessarily a utilitarian item - it is thin and light and would not stand up to much serious use. It may be more of a cultural item, from an area where men habitually carry spears yet rarely use them.

Although the piece is not necessarily well-made, it certainly looks like it was. Overall, the shape is trim and elegant. The strong midrib and bare metal/oxide decoration make for a dramatic appearance (much like the Tutsi spearhead I described last weekend). Another interesting decorative feature is the patchwork or checkerboard design of oxide and metal created by removing areas of oxide. The nice, long ferrule is a strong, functional element. The edges are blunted, which generally indicates a tourist-art origin. Would have been used with a 6-7' hardwood or possibly bamboo shaft. I hope to pair this with a cane shaft in the near future. There's a small hole near the base of the ferrule for a pin.


Length (overall): About 17".
Length (blade/point): About 10 1/4".
Length (other dimensions): Socket is a little over 6".
Width at widest point (blade/point): About 1 1/4".
Width (other dimensions):

Materials: A lightweight piece of steel. Object has a dirty, dusty appearance (would benefit from a light cleaning). A forging flaw is evident on one of the blade's faces. The steel is not high-quality and was probably recycled from scrap materials. The ferrule or socket is long, with an opening slightly less than 1".

I remember seeing a similar spear on display at the Houston Museum of Natural History's Lucy exhibit several years ago. A bident spear was also displayed (I have one I'll be describing shortly). The patchwork design seems diagnostic for Ethiopian spearheads, although it's probably found on Somali points as well.

Wednesday, May 12, 2010

A javelin or spear point from Sudan, Africa



This is an interesting item. Not sure how to classify it - it's midway between a spear and javelin point. I know it doesn't really matter how an object is classified - ultimately, they're all projectile points. It would be at the heavy end of the spectrum for a thrown spear. At the same time, the numerous barbs would render the point pretty useless for hand to hand combat. The rows of barbs might suggest use as a fish spear, but the wide cutting blade is unnecessary for that purpose.

This is not a well-made piece. The socket is rough. The blade is simply flattened out and formed into a lanceolate shape with no indication of a midrib or lens-shaped cross-section. Although long, the barbs are pretty ragged and more excess material could have been removed. Still, I am reluctant to conclude that this is a tourist piece. There's a uniform coating of rust (which could have been artificially added, of course). Combined with a balanced bamboo shaft, this would have been an effective weapon against opponents or for medium-sized game. Decoration consists of a series of chiseled crosshatching and rudimentary reverse barbs at the base of the shank.

Length (overall): About 13 3/4".
Length (blade/point): A bit over 3".
Length (other dimensions): Socket is 3". Shank is about 7". Barbs are about 1/2".
Width at widest point (blade/point): About 1 1/4".
Width (other dimensions): Shank is about 1/2" by 1/2".

Materials: A solid piece of steel. Entire object is covered with a uniform coating of discoloration (not necessarily rust, but a dark, powdery brown patina). Appears to have been made from a narrow bar of iron, hammered flat at one end for a socket and flattened at the other for a blade. Barbs were lifted from the stock with a chisel. Shaft was probably pretty utilitarian. The ferrule or socket is on the small end with a 3/4" opening.

The strongly-barbed point resembles the fish spears widespread throughout the Sudan area, but especially associated with the Dinka. Many were brought back from the Madhist campaigns, but i suspect this one is later. Hope to put it on a cane shaft before too long.

Monday, May 10, 2010

A javelin point from Somalia, Africa




I purchased this small javelin point via eBay last month. I paid about what I imagine it's worth. Somali pieces seem to be pretty desirable, based on other auctions i've watched. This little point definitely passes the made-for-use test. Overall, it's solidly made from thick steel, and is quite sharp. I've noticed that northeast African points tend to be simple in comparison to the more baroque designs of central Africa and the Sahel. The reverse barbing is a dramatic feature, even if it impedes functioning of the main barbs. I imagine these light javelins were carried by mounted warriors in sets of three or more. I suspect they were carried for status/cultural reasons, but they would make effective hunting or military weapons.



Length (overall): About 8 1/2".
Length (blade/point): A bit over 6".
Length (other dimensions): Socket is 2". Both sets of barbs are about 1".
Width at widest point (blade/point): A hair over 1".
Width (other dimensions):



Materials: A solid piece of steel. No forging flaws evident. Some bits of steel remain at the base of the barbs. Slight discoloration, but no pitting or extensive rust. Judging from pictures and other examples on eBay, shaft was a light-colored hardwood, probably glued in place with gum?Shaft was probably on the shorter side, maybe 5'. The butt of the spear would have had a simple coil of brass wire or a strip of iron cut from a sheet.



The ferrule or socket is tiny with a very narrow opening (1/2"). The shaft would have to have been tapered a great deal, and then glued in place. The point is decorated with brass or copper wire, now tarnished. There are two separate bands of intricate woven wirework.



The blade is slightly lens-shaped in cross-section without a median ridge. The point appears to have been sharpened a little, but not a great deal. The point and edges are quite sharp. File marks present. I like these small, ornate javelin points from central and eastern Africa - I have one other old Central African javelin point I hope to describe shortly.

Sunday, May 9, 2010

A Tutsi spearhead from Rwanda, 20th c.


This spearhead was purchased via eBay late last month. I paid a bit more than i've been bidding on spears, but i felt it was worth it. Spears are still undervalued, especially compared to American Indian items. I purchased an old Javan tombak spear with shira-saya type display mountings from the same seller (later). I'm always uncertain if an object i'm purchasing is a legitimate old piece made for use, or a newer piece made for the tourist market. This one's definitely made for use. It is light and graceful, much like the Tutsi pastoralists themselves, who are said to be some of the tallest peoples of Africa.


Length (overall): 17".
Length (blade/point): 12".
Length (other dimensions): Socket is 5".
Width at widest point (blade/point): 1 1/2".
Width (other dimensions): Blade tapers from 5/8" about 1" from tip, remains roughly parallel for about 9", then swells to 1 1/2" at base.



Materials: A clean, solid piece of steel. No forging flaws evident. There's some slight discoloration, but no pitting or extensive rust. Shaft was bamboo (some remnants are still present in socket), probably glued in place with gum? Shaft was tapered to fit. I couldn't find any Tutsi spears, or any spears at all from Rwanda or Burundi in the AMNH collections, so I can't make any assumptions about shaft characteristics. I imagine the shaft was 6' or so with a short, well-made tail.

Overall, the spear is essentially sword-form, like a small Maasai spear. I didn't realize sword-form spears were so common in East Africa, especially the more northeastern areas. The ferrule is fairly narrow, befitting a light, graceful spearhead. The ferrule is decorated at top and bottom with incised rings. No remnants or signs of copper wires, etc.



The blade is strongly ogival in cross-section. I think that's a pretty remarkable feature, but it only becomes apparent when the object is handled. I suppose the most distinct stylistic feature of the blade is the use of contrasting polished/oxidized surfaces, corresponding with the concave/convex facets. I recently sold a small decorative spear (I assume it was from Kenya, and probably less than 20 years old) that had similar oxidized/polished surfaces. It doesn't appear to have been sharpened much, but it is quite sharp (which supports my belief the object was made for use - most [but not all] of the tourist pieces i've handled have blunted edges). File marks present

The Tutsi (Watusi, Watutsi, etc., the Wa and Ba prefixes were generally dropped in the 1970s) are of course the Tutsi of the Rwandan Hutu/Tutsi conflict in the 1990s. The incident had nasty colonial overtones, of which many other, finer authors have written volumes. I imagine this point is much older than the genocide.

I'm pleased with the spear and will not be trading it off any time soon.